AMPLIFIERS

No531H
No531H
No531H
No531H
No531H
No531H
No531H

No531H

The Nº531H and Nº532H are both true mono-block designs with independent power supplies for each channel and are rated at 300W per channel into 8 ohms. The transformers and power supply designs deliver unsurpassed dynamics and transient responses for today’s demanding audio formats and provide stability with even the most difficult to drive loudspeakers. Fully differential circuitry ensures that balanced input signals stay that way throughout the signal path and traditional Mark Levinson “Hurricane” binding posts offer secure termination to the loudspeaker.

得獎項目 / Awards & Reviews

http://www.marklevinson.com/productdetail/~/product/n531h.html





Communication and Control one Ethernet 10Base-T port; one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc; one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc; 3-pin IEC standard power connector
Frequency Response within 0.5dB from 10Hz to 20kHz
Inputs One balanced XLR input per channel; one unbalanced RCA input per channel
Input Impedance 60 kΩ (balanced); 30 kΩ (unbalanced)
Input Sensitivity 2.83Vrms output at 130mVrms input
Rated Output Power into 8 ohms 300W/ch (20Hz to 20kHz at
Gain 26.8dB
Power Requirements 100V~, 120V~, 230V~, factory set for destination country;
Speaker Connections one pair “Hurricane” loudspeaker outputs with banana-plug sockets per channel (banana-plug socket not available on the 230 VAC models&#41
Height (with feet): 7.65" (19.4cm); (without feet): 6.97" (17.7cm)
Width 17.75" (45.1cm)
Depth 19.83" (50.4cm)
Weight Net Weight: 52.5lb (23.8kg); Shipping weight: 62.5lb (28.4kg)
Power Consumption 300W

推文到推特 推文到臉書

上一則   |   回上頁   |   下一則



購物車
購物車
瀏覽紀錄
瀏覽紀錄
查詢訂單
填寫已付款單