STEREO PREAMPLIFIERS

No.326S
No.326S
No.326S
No.326S
No.326S
No.326S
No.326S

No.326S

Nº326S
"With a single-chassis design, the N°326S achieves separation of audio circuit, control circuit, and power supply sections similar to that of the dual-chassis N°32. The internal structure of the N°326S separates these sections, while a steel shield box protects the power supply and other circuits against electrostatic and magnetic interference. Filtered AC power is routed outside audio circuit sections, providing audio circuits with the quiet, shielded environment essential for superior sound.
Like most high-performance audio components, the N°326S relies on clean, noise-free AC power to deliver maximum performance. Unfortunately, most AC power does not meet these standards. Common household appliances such as refrigerators, TVs, and computers often contaminate AC power lines with line noise, spikes, and other irregularities that make it difficult for audio circuits to perform up to their full potential.
To compensate for this, the N°326S offers a series of highly effective noise suppression and isolation techniques that begin filtering AC power for noise as soon as it enters the chassis. Audio and control circuit sections use independent power supplies, each with its own low-noise toroidal transformer. The audio circuit power transformer includes a Faraday shield between the AC power line and low-voltage secondaries for improved isolation."

http://www.marklevinson.com/productdetail/~/product/n326s.html

得獎項目 / Awards & Reviews


DESCRIPTION Unless otherwise specified, these specifications indicate nominal values measured over a 20Hz to 20kHz bandwidth through balanced (XLR) connections.
COMMUNICATION AND CONTROL 2 8-pin RJ-45 connectors for Link communication; 1 6-pin modular RJ-11 connector for RS-232 communication; 1 3.5mm mini-jack for trigger output; 1 3.5mm mini-jack for ir input
FREQUENCY RESPONSE 10 to 40kHz, ±0.2 dB
INPUT IMPEDANCE 100kΩ
ANALOG AUDIO INPUTS 3 balanced (female XLR) stereo inputs; 4 single-ended (Mark Levinson-RCA) stereo inputs
ANALOG AUDIO OUTPUTS 1 balanced (male XLR) stereo main output; 1 single-ended (Mark Levinson-RCA) stereo main output; 2 single-ended (Mark Levinson-RCA) stereo record outputs
TOTAL HARMONIC DISTORTION (THD) < 0.001%
CROSSTALK < -94dBV, 20Hz to 20KHz (input terminated)
GAIN 0, 6, 12, or 18dB (line-level stage)
OUTPUT IMPEDANCE < 50kΩ
POWER REQUIREMENTS 100, 120, 220, or 230V AC power at 50 or 60Hz (preset)
SPEAKER CONNECTIONS Two pairs of "Hurricane" loudspeaker output binding posts with banana-plug sockets (banana-plug socket not available for some models)
HEIGHT 2.92” (74.04mm)
WIDTH 17.75” (450.85mm)
DEPTH 13.58” (344.91mm)
WEIGHT 30lb (14kg)
POWER CONSUMPTION 50W maximum

推文到推特 推文到臉書

回上頁   |   下一則



購物車
購物車
瀏覽紀錄
瀏覽紀錄
查詢訂單
填寫已付款單